
Add to Cart
TRS3232EIPWR RS32EI TSSOP RS-232 Interface IC Semiconductor Devices
MORE STOCK
TLV9004IRTER | TCAN332GDR | TCAN1042HVDRBTQ1 | ULN2803ADW |
CSD18501Q5A | LM3409MYX/NOPB | CSD16301Q2 | TLV70018DDCT |
SN65HVD1040DR | LM2902KAVQPWRQ1 | INA196AIDBVT | TPS61021ADSGR |
LM5009AMMX/NOPB | CSD87331Q3D | UCC27517DBVT | THS4551IDGKR |
LM2901AVQPWRQ1 | TPS74701QDRCRQ1 | CSD13381F4T | TPS7A1901DRBT |
SN65HVD1786DR | UA78M05CDCYR | TUSB1210BRHBT | TCAN332GDR |
TPA3111D1PWPR | LM2901AVQPWR | TPS259270DRCT | THS4551IDGKT |
LM2901AVQPWRQ1 | DRV5013ADQDBZT | LMR16006YQ3DDCRQ1 | TXB0104QPWRQ1 |
TPA3126D2DADR | REF3312AIDCKT | TPS25200QDRVTQ1 | TPS73601DCQR |
LM2902KAVQPWRG4Q1 | TLV70018DSET | TPS2543RTET | LM5009AMMX/NOPB |
BQ24195LRGER | TPS22968NDPUT | TLV70450DBVT | CSD18501Q5A |
PCM1860DBTR | TPS22968NDPUT | TLV70450DBVT | TPA3111D1PWPR |
TL974QPWRQ1 | CSD18501Q5A | DRV5013ADQDBZT | TPS5410DR |
LMZM33604RLXR | BQ28Z610DRZR | TPS61021ADSGR | TCA8418RTWR |
CSD18501Q5A | LP5907MFX-1.8/NOPB | UCC27517DBVT | CSD87331Q3D |
TPD7S019-15DBQR | UCC27517DBVT | TLV2314IDGKT | SN65HVD232QDRQ1 |
1 Features
• ESD protection for RS-232 bus pins
– ±15 kV (HBM)
– ±8 kV (IEC61000-4-2, Contact discharge)
– ±15 kV (IEC61000-4-2, Air-gap discharge)
• Meets or exceeds the requirements of TIA/
EIA-232-F and ITU V.28 standards
• Operates with 3-V to 5.5-V VCC supply
– Interoperable with RS-232 down to 2.7-V VCC
• Operates up to 250 kbps
• Two drivers and two receivers
• Low supply current: 300 μA (typical)
• External capacitors: 4 × 0.1 μF
• Accepts 5-V logic input with 3.3-V supply
• Available in near chip-scale package (QFN-16, 3
mm x 3 mm), 85% smaller than SOIC-16
• Pin compatible to alternative high-speed devices
(1 Mbps)
– SN65C3232E (–40°C to +85°C)
– SN75C3232E (0°C to 70°C)
2 Applications
• Industrial PCs
• Wired networking
• Data center and enterprise computing
• Battery-powered systems
• Notebooks
• Palmtop PCs
• Hand-held equipment
3 Description
The TRS3232E device consists of two line drivers, two-line receivers, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND).
The device meets the requirements of TIA/EIA-232- F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbps and a maximum of 30-V/μs driver output slew rate