TPIC6B273DWG4 SOP20 TPIC6B273DW TPIC6B273DWRG4 IC Electronic Components

TPIC6B273DWG4 SOP20 TPIC6B273DW TPIC6B273DWRG4 IC Electronic Components

MORE STOCK POWER

Low rDS(on) . . . 5 Ω Typical
Avalanche Energy . . . 30 mJ
Eight Power DMOS-Transistor Outputs of
150-mA Continuous Current
500-mA Typical Current-Limiting Capability
Output Clamp Voltage . . . 50 V
Low Power Consum

description

The TPIC6B273 is a monolithic, high-voltage, medium-current, power logic octal D-type latch with DMOS-transistor outputs designed for use in systems that require relatively high load power. The device contains a built-in voltage clamp on the outputs for inductive transient protection. Power driver applications include relays, solenoids, and other medium-current or high-voltage loads.

The TPIC6B273 contains eight positive-edgetriggered D-type flip-flops with a direct clear input. Each flip-flop features an open-drain power DMOS-transistor output. When clear (CLR) is high, information at the D inputs meeting the setup time requirements is transferred to the DRAIN outputs on the positivegoing edge of the clock (CLK) pulse. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse.

When the clock input (CLK) is at either the high or low level, the D input signal has no effect at the output. An asynchronous CLR is provided to turn all eight DMOS-transistor outputs off. When data is low for a given output, the DMOS-transistor output is off. When data is high, the DMOS-transistor output has sink-current capability.

Outputs are low-side, open-drain DMOS transistors with output ratings of 50 V and 150-mA continuous sink-current capability. Each output provides a 500-mA typical current limit at TC = 25°C. The current limit decreases as the junction temperature increases for additional device protection. The TPIC6B273 is characterized for operation over the operating case temperature range of –40°C to